Model specifications
| Rated output voltage | 48V |
|---|---|
| Rated output current | 2.5A |
| Rated output power | 120W |
| Ripple and noise (maximum) | 150mVp-p |
| Output adjustment range | 48 – 55V |
| Efficiency (typical) | 89% |

48V DC · 2.5A · 120W DIN-rail AC/DC power supply
Industrial single-output power supply for TS-35 DIN-rail mounting. Compare output variants and assess nominal load capacity using model-specific electrical ratings.
Before specifying, verify the latest model ratings, datasheet revision, applicable approvals, availability, and installation derating requirements using the manufacturer datasheet linked below.
NDR-120 industrial DIN-rail supply
| Rated output voltage | 48V |
|---|---|
| Rated output current | 2.5A |
| Rated output power | 120W |
| Ripple and noise (maximum) | 150mVp-p |
| Output adjustment range | 48 – 55V |
| Efficiency (typical) | 89% |
Estimate load utilization and an optional planning reserve. Verify ambient temperature, installation orientation, clearances, input conditions, startup loads and manufacturer derating separately.
Choose the output voltage required by your equipment. Rated current and power vary by model.
| Model | Output voltage | Rated current | Rated power | Typical efficiency |
|---|---|---|---|---|
| NDR-120-12 | 12V | 10A | 120W | 85.5% |
| NDR-120-24 | 24V | 5A | 120W | 88% |
| NDR-120-48 | 48V | 2.5A | 120W | 89% |
Verify TS-35 rail compatibility, mounting orientation and minimum installation clearances in the manufacturer's instructions.
Check the manufacturer derating curves for ambient temperature and input voltage; do not assume the full nameplate rating applies under all conditions.
Review upstream protection, terminal wiring, earthing, startup current and enclosure requirements for the intended installation.