A.N.B. Electronics Co., Ltd. · Industrial power solutions in Thailand
Engineering resource · LED driver configuration

MEAN WELL ELG-150-24

Constant voltage + constant current · 24V · 6.25A · 150W

Compare the output configurations in the ELG-150 series, check the electrical operating region and review manufacturer-specific selection requirements.

Before specifying, verify the latest model ratings, datasheet revision, applicable approvals, availability, and installation derating requirements using the manufacturer datasheet linked below.

ELG-150-24

ELG-150 LED driver output configuration

Output configuration specifications

24V
Rated voltage or operating region
6.25A
Rated or default output current
150W
Rated output power
Output modeConstant voltage + constant current
Output voltage / operating region24V
Rated / default output current6.25A
Rated power (higher input band, where applicable)150W
Rated power at lower AC input105W
Typical efficiency89%
Output ripple / current ripple200mVp-p
Function suffix selection: The manufacturer may require a functional suffix (such as A, B, AB, or other available options) to specify the orderable product. This engineering page describes the base output configuration; confirm the full SKU, dimming function, environmental rating and availability before ordering.
Input-dependent rating: Manufacturer tables show 150W at the higher input-voltage band and 105W at the lower input-voltage band. Do not size the load using the higher rating without verifying AC input conditions.

Nominal load-sizing calculator

At the lower specified AC input range, the manufacturer rates this model at 105W; the higher rating is 150W at the higher input range. Use the appropriate input condition. For LED loads, also verify the required drive mode and startup behavior.

Compare ELG-150 output configurations

Compare operating modes and electrical ratings. Function suffixes must be verified separately where offered.

ConfigurationVoltage / regionCurrentPowerEfficiency
ELG-150-1212V10A120W88.5%
ELG-150-2424V6.25A150W89%
ELG-150-3636V4.17A150.1W90%
ELG-150-4242V3.57A150W90%
ELG-150-4848V3.13A150.2W90%
ELG-150-5454V2.8A151.2W91%

Explore ELG family →

LED-driver installation and selection

Output compatibility

Confirm whether the load needs constant-voltage, constant-current, or constant-power operation. Check LED forward voltage and operating current.

Environment and derating

Verify temperature, enclosure, IP rating, cooling and the manufacturer derating curves. IP protection varies by series and functional option.

Controls and safety

Check dimming interface, wiring, protective behavior, approvals and the exact suffix before selecting an orderable SKU.